Yamaha’s purpose-built 5.3-litre 350-horsepower V8 outboard surges to the front of the fleet when it comes to thrust and trust for moving big, offshore beasts. Now Yamaha’s new F350C model becomes the only outboard in its horsepower class to feature a FIVE-YEAR LIMITED WARRANTY, because reliability and confidence are important when you’re taking control of the open water.
Dealer #: 6249
AVAILABILITYAbbotsford: Contact the store for more details or to order.
Port Moody: Contact the store for more details or to order.
Everything’s Under Control
Seven different sensors constantly measure vital atmospheric conditions and engine functions to give the Engine Control Module (ECM) the information needed to precisely and instantly adjust the fuel/air mixture for optimum performance.
Variable Camshaft timing
This system advances and retards the angle of the intake camshaft to increase valve lift, duration, and overlap in the low- and mid-rpm ranges. This gives the engine substantially greater torque between 2000 ~ 3500 RPM to plane large offshore boats with authority.
Dual In-Bank Exhaust
Yamaha’s exclusive In-Bank exhaust means it exits through the centre of the engine between the “V” of the cylinders, rather than on the exterior side, to allow for a more compact shape.
Ultra Strong gear-case
It’s large, streamlined design incorporates hardened gears and high strength oversized bearings and bearing surfaces to handle the tremendous power of the F350.
Forged motor mounts and oversized bracket
The F350 features four motor mounts made of strong forged aluminum, which means they’re compressed in molds for much greater strength than cast aluminum-type mounts. The oversized mounting bracket features the same bolt pattern and centerline as the F250, but uses two additional mounting bolts for a total of six. It is designed to handle the engine’s power while minimizing noise and vibration.
Programmable maximum tilt angle
With a simple programming change through the Yamaha Diagnostic System, it’s possible to adjust the full tilt-up setting on the F350 to meet the requirements of individual applications.
Variable trolling RPM control
By just pressing a button on the Command Link gauges, the operator can adjust the engine’s trolling speed from 600 ~ 1,000 rpm, in 50-rpm increments. This helps provide precise and consistent trolling speeds in wide array.
Direct ‘coil-in-cap’ ignition
Spark plug caps come with the ignition coils built right in. The result is increased performance and reliability in a much simpler (no hi voltage wires) and more compact design.
Saltwater Series XL Propellers
In order to harness the power and torque of Yamaha’s F350, Yamaha designed special Saltwater Series XL propellers specifically to move large, heavy offshore boats. With larger diameter and 21% more blade surface area than our Saltwater Series II propellers, they help enable the F350 to deliver up to 45% more thrust than 250hp-class outboards.
Yamaha’s Command Link Digital Electronics Control
Features a built-in redundancy system using an additional Engine Control Module (ECM), which provides for continued operation if ever needed.